The Telaire 7001 handheld carbon dioxide sensor features patented Absorption Infrared technology. Each sensor measures CO2 and temperature and can calculate and display real-time ventilation rates. When combined with the HOBO U12 or ZW Series it can record CO2, and when connected to an analog input on a H22, RX3000, or U30 Series it can record temperature and CO2. The Telaire comes with an adapter but also operates up to 70 hours on 4 AA batteries (not included).
- Record 0 to 2500 ppm when using the CABLE-CO2 and a U12 or ZW
- Record 0 to 4000 ppm when using the CABLE-2070 and a H22 or U30
- AC Power Adapter Included
In what environment does this sensor operate?
This sensor operates in an indoor environment.
What measurements does this sensor support?
The TEL-7001 sensor supports the following measurements: Carbon Dioxide and Temperature
The country of origin for this product is Mexico. To see the full specifications for this product, please see our product manual found under the documentation tab if available.
When using the CABLE-CO2 and a U12 or ZW: 0 to 2500 ppm
When using the CABLE-2070 and a H22 or U30: 0 to 4000 ppm
Telaire 7001 operating range: 32°F to 122°F (0°C to 50°C), 0 to 95% RH, non-condensing
Display resolution: ±1 ppm
Accuracy: ±50 ppm or 5% of reading, whichever is greater
Repeatability: ±20 ppm
Temperature dependence: ±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced at 25°C.
Pressure dependence: 0.13% of reading per mmHg (corrected via user input for elevation)
Response time: <60 seconds for 90% of step change
Warm-up time: <60 seconds at 72°F (22°C)
Calibration interval: 12 months Full factory calibration available by contacting GE Measurement & Control Solutions.
Battery type: Four AA batteries (not included)
Battery operation: 80 hours (alkaline)
External power supply specifications
AC/DC adapter (included)
Output: 6 VDC, 500mA output.
Power connector: Round barrel with 2.5mm ID , 5.5mm OD, 12mm long, center positive (+6 VDC), outer shell ground.