HOBO U-Shuttle
Overview
Conveniently offload data in the field with the HOBO U-Shuttle Data Transporter. This product also allows users to easily relaunch HOBO U-series data loggers and HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems. View readings on a 2 x 16-character display for selected data loggers, and access logger status for all loggers. An Optic USB Base Station is required for use with optic USB data loggers.
NOTE: HOBOware Pro software required.
Highlighted Features
- Fast and easy data retrieval
In what environment does this communication operate?
This communication operates in indoor and outdoor environments.
The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available.
Requirements:
HOBOware Pro 2.2.0 or greater; USB cable (provided)
Compatible logger with appropriate cable and/or base station
Compatibility: All U-Series loggers, HOBO Weather Stations (H21-001) and Micro Stations (H21-002 only), and HOBO Energy Logger systems; not compatible with the HOBO Waterproof Shuttle (U-DTW-1)
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature:-10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A
Logger-to-Shuttle Transfer Speed
USB/optic: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes)
Ports:
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time
Batteries main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)
Battery life main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)
Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label
The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).